For 2016–2020 Mercedes-Benz E-Class (W213 Pre-Facelift) Old-to-New 2023 Model Standing Emblem E63-Style Body Kit

For overseas customers, after placing an order, be sure to confirm whether the original vehicle is left-hand drive (LHD) or right-hand drive (RHD), and provide clear photos of the original headlight positions so that we can match the headlights correctly.

This kit fits 2016–2020 Mercedes-Benz E-Class pre-facelift W213 four-door models: E180, E200, E250, E300, E350, E400, E450, and AMG E53. If the original vehicle is a two-door Coupe, only the front bumper can be installed; the side skirts and rear bumper are not applicable.

1. After placing an order, please confirm the grille color (silver or black) and whether the grille needs to include a shield emblem.

2. If you purchase side skirts, you need to inform us whether the original vehicle has a short wheelbase or long wheelbase (the most accurate method is to measure the length of the original side skirt with a tape measure) so that we can ship accurately.

3. If the original vehicle is an E320 or above, it is usually equipped with the 23P function. Please be sure to inform us after placing the order; otherwise, the default aftermarket grille cannot meet the ACC signal penetration requirements. The dashboard will display a fault code, and the 23P function will be completely disabled. A grille that supports 23P signal penetration is required for normal operation.

1. The mold for this product is developed using scan data from the original vehicle, and the product has undergone multiple actual vehicle installation tests at our factory. The mold has been finely polished and revised multiple times, resulting in high fitment when the finished product is installed (please refer to the installation effect pictures below for specific fitment).

2. The bumper is produced with thickened raw materials, providing better structural strength.

3. For this kit, except for one taillight location where the original taillight mounting posts need to be cut off, no cutting of the original vehicle body is required for installation in other areas. It uses replacement-style installation, reducing installation difficulty.

The body kit is made with PP injection molding, the grille with ABS injection molding, the exhaust tips are stainless steel, and the trunk lid is iron.

The headlights have a geometric headlight appearance, but functionally use standard LED light sources and do not have the MULTIBEAM LED function.

If you need optional front lip, rear spoiler, side lip, or rear lip, please first go to the effect picture section to find the corresponding installation effect pictures. If you cannot find your desired style, please send a reference picture of the exterior style you like to customer service.

Packaging method: wooden frame + carton. Dispatch time: ships within 1–2 days after payment.

In the picture below, the red text on the left represents the packaging volume without a wooden frame, and the red text on the right represents the packaging volume with a wooden frame. This is the standard packaging method. If the quantity of goods is large, an oversized carton can also be used to allow a single carton to load more goods; at the same time, multiple pieces of goods can be combined into one wooden frame to save shipping volume.